How To Clear a Rest room Exhaust Fan

Probably the most environment friendly recommendations on the way to clear a toilet exhaust fan.

tab62/Shutterstock

As you sort out your rest room cleansing guidelines, there’s yet another chore you may need to add—the exhaust fan. In reality, it’s extra vital than you may assume to know the way to clear a toilet exhaust fan. That little fan helps eliminate odors, reduces moisture within the air and might even take away airborne contaminates from family cleansing chemical compounds.

A unclean fan lined in mud doesn’t work effectively. And in case your exhaust fan is on the fritz, extra moisture has no the place to go—which ultimately will result in mildew and mildew. So right here’s the plan—don’t neglect that fan. Give it a superb cleansing about each six months. Learn on to learn how to totally clear your rest room exhaust fan, however first flip off the fan on the circuit breaker for security. You then’re able to get began.

Nobody desires a moldy rest room—right here’s the way to stop it.

How Do You Take away a Rest room Vent Cowl?

To take away the duvet, gently pull down on the duvet to reveal the fan; then squeeze the steel mounting wires on both facet and slide them out of their slots. This may enable the duvet to be fully faraway from the fan housing. Now you’ll be able to see the quantity of mud and dirt you might be coping with, and get to work.

Clear the Vent Cowl with Soapy Water

Cleansing the duvet is straightforward. Refill your rest room sink with heat water and some drops of dish cleaning soap. Enable the duvet to soak within the soapy water for a couple of minutes. Then scrub the fan cowl with a fabric or dish brush eradicating all filth, mud and dirt. Place the duvet on a towel and permit it to air dry whilst you transfer on to the subsequent step—cleansing the fan.

Does your exhaust fan want greater than a cleansing? Right here’s the way to set up a brand new one.

Use a Vacuum to Get Rid of Mud on the Exhaust Fan

Earlier than you contact the exhaust fan, unplug the usual two-prong plug that powers the fan. If you wish to be further cautious, you’ll be able to flip the facility off to the lavatory on the circuit breaker. When you’re sure there is no such thing as a electrical energy to the fan, you’ll be able to safely clear it. Begin by eradicating mud with a vacuum extension wand and attachments. For the fan motor parts and fan housing, use a bristle brush dusting attachment. For the extra slim and laborious to succeed in areas, use the crevice attachment. Keep a lightweight contact so that you don’t injury something.

Learn the way to forestall these pesky water stains round your rest room fan.

Take away Grime with a Damp Material

As soon as the dry mud is eliminated, you’ll most likely discover the exhaust fan remains to be soiled with built-up grime. Take a moist microfiber fabric and wipe down the fan parts and housing to take away any remaining filth. Seeking to carry out an additional deep clear? Don’t be afraid to additional disassemble the fan. Relying in your mannequin, take away any seen screws and take away the motor from the fan housing. Clear the fan blades and surrounding motor elements with the damp microfiber fabric.

Psst! Right here’s the way to clear your complete rest room sooner!

Reassemble the Exhaust Fan

With a clear fan and a canopy that appears like new, it’s time to place the fan again collectively. Should you eliminated the motor, now could be the time to place it again in place and substitute the screws. Subsequent, plug within the fan to revive energy. Then put the duvet again on by inserting the mounting wires again into their slots, and gently push the duvet into place.

Now that you understand how to scrub a toilet exhaust fan, learn how to repair a loud rest room fan!